Insertion Failure
Weaving defect identifies the location of a failed filling insertion on a projectile or rapier loom. Occurring when the filling yarn stops before crossing the full width of the shed, pick stalling creates a thin place or a gap in the fabric structure. Automatic sensors on modern looms detect this interruption and stop the machine to prevent further damage.
Mechanical Resistance
Tension spikes in the supply package or a physical obstruction in the yarn path can trigger the event. When pick stalling happens, the loom operator must manually remove the incomplete pick and restart the weaving cycle. Repeated failures suggest a problem with the yarn quality or the timing of the shed opening.
Loom Synchronization
Adjustment of the brake timing and the insertion speed reduces the frequency of these defects. Because pick stalling often occurs at specific points in the loom cycle, mechanics can diagnose the faulty component by observing the position of the shuttle or rapier. High-speed cameras help in identifying the exact millisecond of the failure while software logs the downtime for efficiency analysis.
Fabric Irregularity
Visual inspection of the finished roll reveals a horizontal line or a change in density where the stall occurred. If pick stalling is not corrected immediately, the resulting fabric may be downgraded to second quality or rejected entirely. Modern looms use sophisticated software to log every occurrence for quality assurance purposes.