Thermal Devolatilization
High-temperature vapor extraction systems pass dry steam through molten polymer streams to vaporize volatile residues without causing hydrolytic degradation. Utilizing superheated steam stripping removes unreacted caprolactam monomer and cyclic oligomers from polycaprolactam melts prior to direct fiber extrusion. Process efficiency depends on maintaining steam temperature above the polymer melting point.
Stripping Mechanism
Molten nylon 6 flows downward through a packed or trayed stripping column while superheated steam flows counter-current upward. The dry steam reduces the partial pressure of volatile components in the gas phase, driving caprolactam out of the melt phase. Superheating the steam prevents water condensation that would otherwise hydrolyze the polyamide chains and drop molecular weight.
Continuous devolatilization yields low-monomer polymer suitable for high-speed filament spinning.
System Recovery
Monomer-laden steam exiting the top of the stripping column enters a condenser and distillation unit to recover pure caprolactam. Process heat exchangers recover thermal energy from steam loops to reduce overall plant utility consumption. Devolatilized polymer melt pumps directly into spinning manifolds or pelletizing units.
Boundary Limit
Superheated steam stripping applies exclusively to thermal devolatilization of unreacted volatile components from molten polymer melts. Solvent extraction and aqueous leaching of solid polymer chips operate under lower temperature water washing principles. Steam temperature and flow rate must be controlled to prevent thermal degradation of the polymer matrix.