Chemical Dissolution
Laboratory procedure used to isolate specific fibres within a blend by selectively destroying one component with concentrated reagents. Standard protocols for acid digestion often use 70 percent sulfuric acid to remove cotton or viscose from polyester blends by dissolving the cellulose while leaving the synthetic polymer intact. This method allows the lab to determine the mass percentage of the acid resistant component through precise gravimetric analysis of the remaining residue.
Material Selectivity
Reagent concentration and temperature determine which polymers survive the bath. Many synthetic fibres remain intact during acid digestion while natural cellulose fibres undergo complete hydrolysis. Success depends on maintaining precise thermal control to prevent the unintended degradation of the secondary fibre.
Gravimetric Verification
Weighing the dry residue provides the final quantitative data for a composition label. The technician dries the remaining material to a constant mass after acid digestion finishes. Any loss of the resistant fibre must be corrected using a predetermined recovery factor to ensure the reported blend percentage reflects the original state of the yarn.
Process Boundary
Harsh chemical treatments are restricted to quantitative analysis because the process creates chemical waste in bulk recycling. Most labs apply acid digestion only when mechanical separation is impossible. Resulting data confirms whether a mill has met the specified fibre blend ratios.