Polymer Breakdown
Chemical polymer breakdown describes the deliberate degradation of synthetic fibres inside organic liquids during textile recycling operations. Synthetic materials such as polyester yarn dissolve completely when exposed to specific glycols at elevated temperatures under controlled pressure vessels. Commercial reclaim plants rely on solvent dissolution to separate blended fabrics containing cotton and spandex mixtures before depolymerization begins.
Solution Viscosity
Fluid resistance measurements dictate whether a dissolved polymer solution meets spinning grade requirements for secondary filament extrusion. Laboratory technicians measure efflux time through capillary tubes to calculate intrinsic viscosity values for the recovered polymer stream. High molecular weight polymers produce thick solutions that clog spinneret orifices during subsequent wet spinning stages.
Phase Separation
Temperature manipulation forces the dissolved polymer to precipitate out of the liquid medium as a solid cake. Cooling the reaction vessel reduces polymer solubility and precipitates pure oligomers away from residual dye contaminants and spinning finishes. Vacuum filtration captures the purified solid cake while filtrate streams pass through distillation columns for solvent recovery.
Recovery Efficiency
Distillation columns separate glycols from water byproducts to maintain high purity standards for subsequent extraction cycles. Reclaimed solvents undergo gas chromatography analysis to verify that residual monomer concentrations remain below strict manufacturing thresholds. Closed loop processing units recycle recovered chemical reagents back into the digestion reactor to minimize operational expenses and environmental impact.