Measurement Principle
A physical measurement technique determines fiber diameter by analyzing the amount of light blocked by a fiber as it passes through a laser beam. In automated wool testing instruments, optical obscuration provides a direct correlation between the shadow cast by a fiber snippet and its actual thickness in microns. This non-contact measurement method allows for the rapid processing of thousands of individual fibers per minute.
Signal Processing
High-speed photodetectors convert the reduction in light intensity into electrical voltage pulses. Because optical obscuration produces a signal amplitude proportional to the fiber cross-section, the system translates these voltage drops into precise micron dimensions. This electronic processing enables real-time statistical analysis of the fiber sample.
Particle Sizing
Fiber alignment within the liquid stream is controlled to ensure that each fiber passes through the center of the beam. During the analysis run, any overlapping or clustered fibers are detected by the signal processing software and excluded from the final diameter count. This filtering maintains the accuracy of the overall histogram.
System Integrity
Laser source stability is monitored to prevent drift during continuous testing. Fluctuations in light intensity can corrupt the obscuration calculations. Clean lenses are essential for reliable sensor performance.