Mixing Proportion
A quantitative proportion defines the mass ratio of distinct production specimens combined into one composite laboratory test sample. The sample pooling ratio determines the dilution factor applied when screening multiple fabric swatches for restricted substance compliance. Standard testing procedures limit combined component counts to three swatches.
Dilution Control
Combining three equal swatches of one gram each creates a three-to-one combined mixture for analytical extraction. Setting a sample pooling ratio requires adjusting analytical instrument detection limits to account for specimen dilution. If one constituent roll contains hazardous chemicals while two are clean, the measured concentration in the composite extract equals one-third of the original contamination level.
Laboratory technicians weigh each constituent swatch on analytical balances to ensure exact equal representation. Matrix effects increase when blending fabrics with differing dye chemistry or synthetic finishes.
Detection Sensitivity
Instrument sensitivity limits dictate maximum allowed pooling combinations without risking false negative results. Adjusting the sample pooling ratio allows laboratories to optimize testing throughput without compromising regulatory compliance limits. Screening protocol guidelines under ISO standards specify maximum pooling limits for volatile organic compounds and phthalates.
Analytical Limit
Excessive pooling ratios dilute target analytes below instrument detection thresholds. Reaching maximum sample pooling ratio limits requires immediate transition to individual roll testing protocols.