Analytical Medium
Purified water produced by single distillation or reverse osmosis provides the baseline solvent for routine chemical analysis and solution preparation. In textile laboratory testing, grade 3 water is specified for washing glass equipment and preparing non-critical test reagents. This grade of water balances economic feasibility with sufficient purity to prevent heavy metal contamination during standard fabric extractions.
It must have a conductivity of less than five microsiemens per centimetre at twenty-five degrees Celsius.
Purity Specification
The standard limits the presence of dissolved silica, organic matter and inorganic salts to levels that do not interfere with general colourfastness or pH tests. This prevents false positives during chemical analysis. Unlike higher grades, grade 3 water is easily produced in bulk and stored in polyethylene containers without rapid degradation of its electrical resistivity.
Laboratory Utility
Standard testing methods for colourfastness to perspiration or rubbing require this water for making up the simulated test solutions. Preparing these solutions with ordinary tap water introduces chlorine and mineral salts that skew the test results. Thus, the laboratory uses this medium to maintain reproducibility across different shifts and testing locations.
Quality Limit
This medium is unsuitable for high-performance liquid chromatography or atomic absorption spectroscopy. For these sensitive measurements, the higher purity of grade 1 or grade 2 water is required to avoid sensor contamination.