Process Measurement
Ratio of the weight of liquid retained by a fabric to the weight of the dry fabric after passing through an impregnation zone. Variations in liquor pickup directly influence the concentration of chemicals or dyes deposited on the textile substrate. Achieving a consistent percentage across the full width of the cloth prevents shading defects and ensures even finish application.
Mechanical Influence
Pressure settings on the padder rollers and the speed of the machine determine the final volume of liquid held within the yarn interstices. A higher expression pressure results in lower liquor pickup, which might be necessary for energy savings during subsequent drying stages. Different fabric constructions, such as heavy canvases or light lawns, naturally exhibit different saturation limits.
Application Control
Accurate calculation of this value allows the mill to adjust the chemical bath concentration to meet the required add-on weight for specific treatments. If the fabric exhibits a consistent liquor pickup, the bath can be formulated so that this specific volume contains the correct dosage of active ingredients. This calculation is a fundamental checkpoint in continuous finishing lines.
Verification Procedure
Weighing a sample before and after padding provides the precise data needed to calibrate the application. This measurement defines the liquor pickup for the production run.