Airflow Transport
Moving raw fiber through a mill relies on the use of moving air to carry the material from one machine to another. Systems utilizing pneumatic conveyance eliminate the need for manual handling or mechanical belts between the blowroom and the carding section. A fan creates a pressure differential that pulls or pushes the tufts through a series of enclosed pipes.
This method keeps the fiber clean and reduces the risk of contamination from the factory floor.
Duct Design
Layout of the piping must account for the friction and turbulence that occur as the material travels. In a pneumatic conveyance setup, smooth interior surfaces and wide-radius bends prevent the formation of fiber plugs. If a pipe is too narrow, the air velocity increases and can damage delicate fibers like long-staple cotton.
Correct balancing of the air pressure ensures that the material arrives at its destination in a loose, open state.
Separation Method
Delivery of the fiber into a hopper or chute requires the air to be separated from the solid material. This is usually achieved using a condenser or a cyclone where the velocity drops and the fiber falls by gravity. The spent air is then filtered to remove dust before being recirculated or exhausted.
Energy Requirement
Operation of high-capacity fans consumes a large portion of a spinning mill’s total power. Optimizing the pneumatic conveyance system involves matching the fan speed to the actual volume of fiber being moved. Variable frequency drives allow the air flow to adjust in real-time.