Migration Ratio
Quantitative measurement evaluates the resistance of dye particles to movement during the thermal processing of wet-treated fabrics. The anti-migration index compares the dye concentration at different areas after drying. A higher value indicates that the auxiliary has immobilized the pigment.
Drying Verification
Laboratory testing employs a standardized heating protocol to simulate the migration patterns that occur on a continuous production line. This procedure requires a wet fabric specimen to be dried under controlled infrared exposure or in a heated oven with a uniform airflow. Spectrophotometric readings are taken at multiple points across the dried surface to determine the coefficient of variation.
This step establishes whether the liquid formulation will remain uniform across the roll width during bulk run-out.
Dye Distribution
Particle movement depends on the capillary forces generated as moisture evaporates from the yarn interstices. The anti-migration index provides a clear evaluation of how well polymeric thickeners or sodium alginates arrest this flow by increasing the viscosity of the aqueous phase. As the temperature rises, these additives form a temporary gel network that holds the dyestuff in place.
Consequently, the fabric avoids shaded edges and back-to-face color variations that spoil the finished garment. This stabilizing action prevents the dye from pooling in the outermost layers, ensuring a deep and uniform coloration through the entire thickness of the material.
Process Limit
Mechanical extraction prior to drying must remain within specified limits to ensure the test yields a reliable prediction of factory performance. If the initial wet pickup is too low, the migration forces are too weak to test the polymer. Conversely, excessive pickup creates a saturated state that overpowers the chemical stabilizer.
The measurement becomes inaccurate when applied to blended fabrics containing fibers with highly divergent absorption characteristics.