Classification Domain
Man-made staple fibers and their resulting spun products occupy a specific legal category within the Harmonized System used for international trade. This category of chapter 55 synthetic yarn excludes filaments, focusing instead on fibers that have been cut to specific lengths before the spinning process. Customs authorities use this designation to distinguish between synthetic materials like polyester or nylon and artificial ones like rayon or acetate.
Structural Composition
Staple length determines the machinery used during the manufacturing phase. Because chapter 55 synthetic yarn relies on discontinuous fibers, the mill must employ ring or rotor spinning. This resulting thread has a hairier profile.
Duty Application
Tariff rates vary based on the percentage of synthetic content relative to other blended materials. When chapter 55 synthetic yarn contains less than 85 percent of a single synthetic fiber by weight, the classification shifts to subheadings that account for the secondary fiber. A mix with cotton or wool changes the applicable duty rate.
Documentation must state the exact weight distribution to ensure correct entry.
Verification Protocol
Laboratory analysis confirms the fiber identity and weight ratio through chemical dissolution or microscopy. Technical specifications for chapter 55 synthetic yarn require testing according to ISO or ASTM standards to validate the staple origin. Discrepancies between the invoice declaration and the physical test result lead to reclassification or penalties.
The presence of filament components disqualifies the lot from this specific heading. If a sample fails to meet the uniformity requirements of the code, the entire shipment faces holding at the port of entry until the mill provides a corrected certificate.