Technical Directive
Industrial standards for dry packaging specify the requirements and testing methods for protective desiccant bags used in transport and storage. The German standard DIN 55473 governs these auxiliary materials to ensure they maintain dry conditions inside sealed packages. It applies to both dust-tight bags that do not shed particles and standard breathable bags used for generic products.
Dehumidification Unit
This specification defines the drying capacity of a desiccant bag in terms of standardized units rather than raw weight. One unit under DIN 55473 corresponds to the amount of desiccant that will absorb at least six grams of water vapor at an ambient relative humidity of forty percent. This formulation allows packaging engineers to calculate the required protection regardless of whether the bag contains silica gel, bentonite, or molecular sieve.
By using units instead of grams, purchasing departments can buy different desiccant types from multiple suppliers and still achieve identical moisture absorption performance inside the cargo containers.
Performance Testing
Laboratories evaluate the bags by exposing them to controlled warm, humid air and measuring the weight gain over time. The testing process also verifies that the bag material resists tearing and does not leak fine dust that could stain delicate items. For textiles, dust-tight construction is critical because mineral dust can leave gray spots that are impossible to remove during downstream scouring.
Industrial Compliance
Exporters of high-value garments and technical fabrics utilize this standard to certify the shelf life of goods shipped through high-humidity regions. By marking the bags with the official stamp, manufacturers demonstrate that their packaging meets international criteria for moisture prevention. This compliance is verified by inspection agents before maritime transit.