Quantitative Method
The physical separation of different fibre types through selective chemical dissolution determines the precise blend percentages of a textile material by weight. In textile testing, gravimetric blend analysis remains the standard method for verifying fibre composition declarations on garment labels. This procedure requires weighing the dry specimen before and after removing one fibre component with a specific solvent.
The weight loss reveals the percentage of the dissolved fibre in the blend.
Chemical Extraction
Solvents like seventy percent sulfuric acid dissolve cotton while leaving polyester intact, allowing the technician to calculate the ratio of each component. This process must run at a controlled temperature to ensure the solvent does not attack the resistant fibre. Each extraction step ends with thorough rinsing, neutralizing and oven-drying of the residue to a constant mass.
Analytical Accuracy
Correcting for the moisture regain of each fibre type is necessary to ensure an accurate calculation. Since fibres naturally absorb moisture from the air, raw weights must be adjusted using standard commercial regain allowances. This adjustment prevents systematic errors in the final composition report.
Inherent Limitation
This method fails when the fibres in the blend have similar chemical solubility or when functional finishes prevent the solvent from wetting the fibre.