Concentrated Alkaline Solvent
Aqueous solutions of sodium hydroxide containing a high concentration of solute per unit mass of solvent are employed to alter the physical structure of cellulosic fibers during mercerization. This high molality caustic forces the cotton cellulose to transition from a highly crystalline state to a more amorphous form, which increases both tensile strength and dye affinity. Proper control of the chemical concentration is verified at the entry padder using in-line density meters.
Mercerization Chemistry
Cellulose fibers swell rapidly when exposed to these intense alkaline conditions, causing the flat, twisted cotton hairs to de-twist and assume a rounded cross-section. This morphological change increases the internal surface area of the fiber, allowing for more rapid penetration of reactive dyes and finishing chemicals. It also enhances the natural luster of the yarn by creating a more uniform reflective surface.
Industrial Application
Continuous padding ranges must maintain a stable concentration of alkali to prevent variation in dye pickup across the fabric width. Automated chemical dosing units continuously inject fresh concentrated solution to compensate for the moisture brought in by the damp fabric. This process requires precise chilling systems because the interaction between the alkali and the cotton fiber is highly exothermic, and excessive heat degrades the swell quality, which in turn leads to uneven color uptake and compromised fabric hand in the final garment assembly.
Recovery Method
Spent solution drawn from the washing compartment is collected in holding tanks to undergo evaporation and purification. This recovery process concentrates the dilute alkali back to the strength required for re-entry into the mercerizing saturator, significantly reducing the chemical consumption of the mill. Acidic neutralizing washes downstream ensure no residual alkali remains on the fabric to interfere with subsequent dyeing stages.