Analytical Measurement Inaccuracy
Chemical separation methods used to determine fiber composition fail when the solvent partially dissolves a component it is intended to leave intact. A microfiber dissolution error occurs most frequently during the testing of polyester and cotton blends when the acid concentration and temperature are too high. This variance leads to an overestimation of the soluble fiber and a corresponding underestimation of the residue.
Chemical Interaction
Concentrated sulfuric acid should target the cellulose while leaving the synthetic fibers untouched. If the exposure time exceeds the limits specified in ISO 1833, the surface of the polyester begins to degrade. This weight loss from the synthetic portion appears in the results as additional cotton.
Temperature Sensitivity
Reactions accelerate at higher ambient temperatures, increasing the risk of damaging the resistant fiber. Laboratories must maintain strict thermal control of the solvent bath to prevent a microfiber dissolution error. Cooling the solution during the initial mixing phase prevents an exothermic spike that would skew the final percentage.
Correction Factor
Standardized d-factors are applied to the final weights to account for the predictable loss of fiber during the test. These constants are derived from repeat testing of known pure samples under identical conditions.