Electrode Deviation
Interference from alkali metal ions in a solution causes a glass ph sensor to report a value lower than the true acidity level. This sodium glass error becomes noticeable when the concentration of sodium ions is high and the ph level is above nine. The sensor membrane begins to respond to sodium ions as if they were hydrogen ions, which distorts the electrical signal.
Error Correction
Laboratory technicians use correction charts or specialized electrodes to account for the false readings. In environments where sodium glass error is prevalent, the difference between the displayed and the actual ph can exceed half a unit. Modern meters often include a temperature and cation compensation algorithm to mitigate this effect.
Using a lithium based glass membrane instead of a standard one also reduces the magnitude of the deviation.
Dyeing Precision
Correct alkalinity is required for the fixation of reactive dyes on cotton fabric. If the sodium glass error is ignored, the dyer might add too much alkali and cause the dye to hydrolyze rather than bond to the fibre. This leads to poor colour fastness and wasted chemicals in the effluent.
Production Reliability
Consistent measurements across different batches ensure that the shade of the fabric remains the same throughout the season. Failure to address the sodium glass error leads to unpredictable results and higher rejection rates in the quality control department. Reliable sensors are the foundation of a predictable wet processing operation.