Analytical Standard
Standard practices for general techniques of infrared quantitative analysis govern the calculation of multicomponent mixtures. The application of astm e168 ensures that laboratories follow uniform procedures when measuring the chemical composition of polymeric resins and textile finishes. It provides the mathematical foundation for converting spectral absorbance values into concentration percentages.
Spectroscopic Method
The procedure starts with the preparation of a calibration curve from known standards of the target polymer or finishing agent. Technicians then record the infrared spectrum of the textile extract or melted polymer film using either transmission or attenuated total reflectance methods. Quantitative software calculates the absorbance at specific analytical wavelengths where the target component exhibits a distinctive, non-overlapping molecular vibration, which allows for isolating the signals.
Measurement Protocol
Bulk textile factories use these spectral measurements to verify the concentration of elastane in blended yarn shipments before fabric knitting begins. The method establishes a reliable checkpoint for validating supplier claims regarding finish-on-fibre levels or moisture-wicking chemical applications. This verification protects the garment manufacturer from subsequent dye failures caused by uneven chemical distribution.
Application Limit
The accuracy of the spectroscopic protocol decreases when the fabric contains complex dye formulations that absorb light in the same spectral region. High pigment concentrations create baseline shifts that distort the quantitative calculation. In these instances, extraction with organic solvents must precede the infrared scan.