Structural Deformation
Longitudinal folds that become semi-permanently set during wet processing often result in visible streaks or lines in finished apparel. The occurrence of fabric rope creasing typically happens when a textile is processed in a rope form rather than at open width. These marks appear as darker or lighter lines because the dye liquor cannot penetrate the compressed interior of the fold uniformly.
Geometric Compression
Tight packing of the material inside a dyeing machine tube facilitates the development of fabric rope creasing. When the fabric remains in one position for too long under heat and pressure, the fibres undergo a physical set. Synthetic fibres like polyester are especially prone to this if they pass through their glass transition temperature while folded.
The internal pressure of the fabric bundle forces the yarns into a fixed geometry that resists recovery.
Visual Defect
Marks left by fabric rope creasing are often impossible to remove during subsequent finishing stages. These defects reduce the commercial value of the fabric and can lead to the rejection of entire dye lots. Buyers usually inspect for these lines under standardized lighting conditions to ensure the face of the fabric is clear.
Process Control
High circulation speeds minimize the risk of fabric rope creasing in jet dyeing machines.