Material Separation
Automated optical separation of shredded post-consumer and post-industrial polymer pieces removes contaminants prior to re-extrusion into recycled synthetic staple fibers. Flake sorting identifies and ejects discolored or foreign polymer flakes from shredded polyethylene terephthalate bottle or fabric waste streams. Recycling facilities employ this purification step to ensure incoming flake stock meets purity requirements for fine-denier fiber spinning.
Automated Processing
Shredded plastic flakes travel along high-speed conveyor belts or gravity chutes beneath optical camera arrays and near-infrared sensors. High-speed sensors scan individual flakes in freefall, identifying chemical composition through infrared spectral absorption and color variations through digital RGB cameras. Pneumatic air jets positioned at the ejection line fire precise compressed air bursts to deflect unwanted flakes, such as polyvinyl chloride particles or yellowed polyester, into reject hoppers while clean flakes continue into primary collection bins.
Multi-sensor sorting systems process several tons of flake material per hour, achieving chemical purity levels exceeding ninety-nine percent clean polyester. Technical operators calibrate sensor sensitivity to balance purity levels against material loss in reject streams.
Contamination Limit
Small flake sizes below three millimeters evade pneumatic air ejection targets due to erratic aerodynamic behavior during freefall. Particle size limitations reduce sorting accuracy when processing heavily shredded textile waste.
Yield Measurement
Excessive contamination levels increase reject air blast frequency, causing clean polymer flakes to get swept into reject streams. High input contamination reduces total process yield and raises processing cost per output ton.