Separation Mechanism
Hydrodynamic separation processes remove hydrophobic ink particles and synthetic polymer residues from repulped recovered cellulosic slurries using dispersed air bubbles. Within recycled textile preparation and secondary paper recovery systems, flotation deinking relies on differences in surface wettability between polar cellulosic fibrils and non-polar toner or pigment complexes. The operational range handles ink particle diameters between 10 and 250 micrometres, stopping at fine colloidal dispersions that cannot collide effectively with bubbles.
Particles below 10 micrometres escape flotation and require mechanical washing instead. Large agglomerates above 250 micrometres bypass bubble capture and must be extracted through slotted screens.
Chemical Conditioning
Alkaline pulping chemistry detaches cured ink films from substrate surfaces through saponification of carrier oils and targeted fibre swelling. Collectors composed of non-ionic surfactants or fatty acid soaps adhere to liberated ink flakes, increasing their relative hydrophobicity. Calcium soaps precipitate onto pigment agglomerates to form an adhesive bridge that enhances attachment to ascending air bubbles within the flotation cell.
Calcium ion concentration governs collector deposition rates, with process water hardness typically balanced between 100 and 200 parts per million of calcium carbonate equivalent. The resulting particle-bubble complexes rise toward the liquid surface to generate a stable, thick foam layer.
Cell Architecture
Continuous separation equipment introduces the aerated slurry into vertical or multi-stage horizontal mechanical cells equipped with fine-bubble diffusers and impellers. Countercurrent liquid motion ensures recycled stock encounters rising air, sweeping detached print fragments toward an overhead overflow weir. Aeration volume fractions remain fixed between 20 and 40 percent to prevent excessive turbulence that shears captured particulates from ascending air paths.
Skimmer paddles continuously harvest the concentrated reject foam, isolating it from the accepted clean fibre core. Fiber loss into the reject stream typically stays between 5 and 15 percent depending on foam stability, skimming intensity and stock consistency. Secondary flotation stages process primary skimmings to recover usable cellulose before final solids dewatering.
Brightness Yield
Commercial acceptance criteria evaluate processed stock through optical brightness gains, residual ink count and ash reduction. ISO brightness tests quantify whitening improvements over raw deconstructed feedstock, measuring the removal efficiency of black carbon and coloured organic pigments. Image analysis scanners inspect accepted handsheets to count dirt specks per square metre, rejecting pulps with excessive ink speckle densities.
Failure to balance surfactant dosage causes catastrophic fibre entrainment or complete foam collapse in the flotation chamber.