Directional Orientation
Fibre ends that bend forward in the direction of the material flow occur frequently during the carding process. The presence of leading hooks reduces the effective length of the fibre and complicates the subsequent drafting operations. Approximately 15 percent of fibres in a card sliver typically exhibit this shape.
Proper orientation is necessary to ensure the fibres can be drawn into a fine, even yarn.
Geometric Impact
Drafting forces behave differently depending on whether the hook enters the rollers first or last. While leading hooks are less common than trailing ones, they still contribute to the formation of neps and yarn irregularities. The mechanical action of the carding wires often causes the fibre tip to snag and fold over.
If these hooks are not straightened, the resulting yarn will have lower strength and higher diameter variation.
Removal Process
Successive drafting stages in the draw frame are designed to pull the fibres straight by using speed differentials between rollers. The number of drawing passages is often determined by the need to eliminate leading hooks and their trailing counterparts. For optimal results, an even number of processes between carding and spinning is standard practice.
This sequence ensures that the majority of hooks are presented to the drafting rollers in the most advantageous direction.
Spinning Boundary
Limits on how many fibres can be straightened depend on the friction between fibres and the settings of the drafting zone. If leading hooks remain in the sliver when it reaches the spinning frame, they can cause the fibre to bunch or break. High quality combed yarns require more intensive removal of these defects than carded yarns.
Monitoring the orientation helps the mill maintain the efficiency of the spinning process and the final quality of the textile.