Structural Count
Nominal thread density of freshly woven cloth measured immediately upon exit from the loom establishes the basic interlacing grid of greige goods. The metric known as loom state sett quantifies warp ends and weft picks per inch or centimetre while fabric remains unwashed, unfinished and free from chemical treatments. Its operational boundary is confined to greige warehouse inspection, ceasing to define the fabric once desizing, scouring, bleaching or dyeing modifies yarn geometry.
Density Formation
Sett density emerges from reed count, drafting configuration and take up motion gearing. The reed sets the nominal warp spacing across the width, while the take up roll rotation sets the picks per unit length. When fabric separates from the loom take up roll, elastic recovery from warp beam tension causes instantaneous pick compaction.
Simultaneously, grey contraction brings warp ends closer together than their spacing inside reed dents.
Process Discrepancies
Grey sett differs substantially from finished sett. Scouring relaxes fiber strain, shrinking fabric lengths and raising weft density. Wet processing swollen fibers increase yarn diameters, altering crimp distribution between warp and weft sets.
Mercerisation or stenter heat setting pulls fabrics to target finished widths, reducing ends per inch to values below the original loom state sett.
Quality Verification
Greige fabric inspectors verify loom state sett against mill specification sheets using pick glasses or travelling optical microscopes. Discrepancies signal incorrect take up gears, slipping clutch drives or improper reed selection. Securing verified greige counts ensures that downstream shrinkage allowances yield the target finished square meter weight and construction specifications.