Fibre Transformation
Chemical swelling alters the physical structure of cotton fibers when they are treated with a concentrated sodium hydroxide solution under controlled tension. This process, referred to as mercerization caustic swelling, changes the fiber cross-section from a flat ribbon to a rounded cylinder. It increases the luster, dye uptake, and tensile strength of the cotton yarn by realigning the cellulose polymers from a highly crystalline to a more amorphous arrangement.
Structural Change
The reaction requires a sodium hydroxide concentration of approximately twenty to twenty-five percent. This high concentration breaks the hydrogen bonds in the cotton cellulose, allowing water and sodium ions to enter and expand the fiber walls. Because the fiber swells, it shrinks in length if not held under tension.
This mercerization caustic swelling must be managed by keeping the yarn or fabric under strict mechanical stretch to align the crystal structures and maximize the resulting luster.
Bath Check
Swelling is checked by measuring the barium activity number.
Process Boundary
If the caustic concentration falls below the threshold, the cellulose structure is only partially converted. This results in uneven dye absorption during subsequent processing steps. Temperature must also be kept low, usually between fifteen and twenty-five degrees Celsius, to achieve maximum swelling.
Mill operators monitor the concentration and temperature of the bath continuously to maintain consistent quality across production batches.