Edge Control
Toothed metal or synthetic rings mounted on an internal axle hold woven cloth out to its reed width during weaving. Loom configurations position temple rings inside temple housings directly adjacent to both selvages at the cloth fell. Radial pins protruding from ring perimeters grip the edge fabric, counteracting the natural inward pull caused by filling yarn crimp.
The mechanical function operates over several centimeters along fabric borders, ending where the stabilized textile exits the temple casing toward take-up rolls.
Pin Geometry
Rings rotate freely around an inclined axle, moving forward with the fabric while maintaining outward lateral tension. Pin length, angle, and density vary based on the woven cloth weight and construction. Sheer silk and synthetic filament fabrics require short, polished brass pins to prevent snagging, whereas heavy denim and canvas fabrics demand rows of hardened steel pins to withstand inward pull forces.
Rubber-coated or synthetic rings without sharp points support continuous filament fabrics vulnerable to mechanical puncture marks. As fabric moves forward, pins disengage cleanly without pulling warp or filling yarns out of alignment.
Defect Inspection
Quality auditors inspect fabric selvages on inspection tables per ASTM D3990 to detect temple marks, pin tears, and edge distortions. Incorrect ring pin selection leaves holes, torn warp threads, and fuzzy edges along finished goods. Such edge damage compromises fabric feed tension through continuous dyeing ranges and causes tears during stenter processing.
Over-pinning coarse fabrics generates pin marks that fail garment cut-and-sew tolerances, forcing cutters to crop wide selvages and reducing usable width. Worn or seized temple rings generate friction lines, dragging warp yarns and causing selvage breakouts during beat-up.
Width Retention
Holding fabric fell width close to the warp reed spread prevents warp end breakage at the edges. Selvage warp threads suffer abrasive friction against reed dents if fabric contraction pulls inward unchecked. Proper ring selection balances lateral grip against pin penetration depth, preventing edge puckering.
Temple rings stabilize selvage tension, ensuring smooth fabric edges through down-loom winding and subsequent wet processing operations.