Process Parameter
The deliberate delivery of fabric into a finishing machine at a speed faster than the exit speed defines the compaction process. This compactor overfeed forces the yarn loops to crowd closer together, which increases the fabric weight per unit area. The technique establishes the baseline dimensions required to control residual shrinkage in the finished garment.
Physical Mechanism
Feed rollers operating at a higher surface speed than the downstream retarding rollers drive the material forward. This speed difference forces the moisture-laden cotton loops to contract along the length of the fabric. The fibers compress mechanically under the influence of heat, moisture, and pressure.
This action redistributes the internal stresses that accumulate during the prior knitting and dyeing operations.
Mechanical Adjustment
Adjusting the overfeed percentage requires careful coordination between the main drive and the entry roll speeds. Operators measure the feed speed ratio using digital tachometers to maintain a stable overfeed rate throughout the production run. If the overfeed rate is set too low, the fabric will fail its subsequent laundry shrinkage test.
Excessive overfeed creates rippling or creasing that cannot be flattened during final batching. This necessitates a recalibration of the roller gap and pressure settings.
Production Consequence
Proper application of the process guarantees that the finished knitwear maintains its shape after washing. The fabric achieves a stable state where it will not shrink further during consumer laundering. However, overfeeding also reduces the overall yield length of the roll, which directly affects the cost calculation for garment cutting.