Surface Degradation
Physical wear on the individual continuous strands within a synthetic or silk yarn leads to a loss of material integrity. During textile processing, filament abrasion occurs when the yarn rubs against ceramic guides, metal reeds, porcelain eyelets or other abrasive surfaces. The damage usually appears as tiny broken loops or a frosted look on the surface of the fabric.
Monitoring the condition of contact points in the mill prevents the gradual weakening of the yarn structure.
Mechanical Friction
Interaction between the moving yarn and the stationary parts of the machine generates heat and physical stress. When filament abrasion happens at high speeds, the friction can melt the tips of synthetic fibres like polyester or nylon. This change alters the way the yarn reflects light, creating permanent streaks in the woven or knitted goods.
High quality manufacturing environments use polished or coated surfaces to minimise this contact resistance.
Pilling Potential
Fragmentation of the continuous strands creates short, loose ends that eventually tangle together. While continuous filaments are usually resistant to shedding, filament abrasion provides the raw material for pilling on the fabric face. These small balls of fibre remain anchored to the core yarn, detracting from the appearance of the finished garment.
Reducing the harshness of mechanical handling during winding and warping limits this tendency.
Tensile Consequence
Reduction in the effective cross sectional area of the yarn directly impacts the load bearing capacity of the material. As filament abrasion removes or breaks the outer layers of the bundle, the remaining core must carry the entire tension of the weaving or knitting process. This leads to a higher frequency of yarn breaks and machine downtime.
Consistent lubrication of the yarn can act as a barrier to protect the delicate filaments from the rougher textures of the loom components. Large numbers of filaments in each yarn bundle provide collective strength only if the outer layers remain intact.