Constrained State
Interfacial polymer phases consist of disordered, non-crystalline polymer chains whose segmental mobility is restricted by spatial coupling to adjacent crystalline lamellae. The rigid amorphous fraction exists as an intermediate structural domain in semi-crystalline synthetic fibers like polyethylene terephthalate and polyamide. Fiber physics laboratories identify this constrained phase to explain anomalies in thermal heat capacity steps during differential scanning calorimetry testing.
Interfacial Architecture
During fiber crystallisation, polymer chains partially incorporate into crystalline lamellae while the un-crystallized segments remain pinned at the crystal surface. This spatial pinning restricts segmental motion, preventing these constrained amorphous chains from relaxing at the glass transition temperature Tg. Instead, the rigid amorphous fraction devitrifies at much higher temperatures between Tg and the main polymer melting point. Temperature-modulated DSC quantifies this phase by measuring missing heat capacity step height at Tg relative to a fully amorphous reference sample.
Thermal Behavior
Higher proportions of constrained polymer chains increase thermal stability and barrier properties in high-tenacity technical yarns. Increasing the rigid amorphous fraction through controlled draw ratios improves dimensional stability under heat.
Structural Limit
Extensive thermal annealing above the devitrification temperature converts rigid amorphous chains into true crystalline lamellae or relaxes them into the mobile amorphous phase. Excessive rigid amorphous content restricts dye diffusion, causing poor dye uptake and uneven coloration in synthetic apparel fabrics.