Fastness Issue
Degradation of colorfastness in dyed polyester fabrics during post-dyeing heat treatments occurs when dye molecules migrate from the inner core of the fibre to its outer surface. This quality failure, known as thermal migration defects, leads to a significant decrease in washfastness, crockfastness, and rubbing fastness of the finished textile. It is a common problem in polyester and blend processing during heat setting or finishing.
Transport Mechanism
High temperatures during dry heat finishing or the presence of non-ionic softeners on the fabric surface can dissolve disperse dye molecules and draw them out of the polyester. As the fabric is heated to temperatures above one hundred and thirty degrees Celsius, the polyester polymer structure opens, allowing dye molecules to diffuse along the temperature gradient. Once on the surface, the dye remains as a loose pigment layer that can easily transfer to other surfaces.
Industrial Impact
Garments constructed from fabrics suffering from this defect can bleed or stain adjacent white panels during home laundering or wet storage. In multi-colored sportswear, this causes color bleeding that can ruin the appearance of the garment and lead to retail returns. Furthermore, rub fastness is severely compromised, meaning that the color can rub off onto undergarments or car seats during use.
To prevent customer complaints, mills must test every batch of dyed polyester after finish application to ensure that the color is locked within the fibre, using standardized dry heat and washing tests to verify stability.
Process Prevention
Reducing the finishing temperature or using specific low-migration disperse dyes can mitigate the risk of these quality defects. Additionally, selecting hydrophilic or anionic softeners instead of non-ionic silicones helps to minimize dye dissolution during finishing. A thorough reduction clear process after dyeing is also crucial to remove any unfixed surface dye before finishing begins.