Equilibrium Profile
Mathematical curves that describe the equilibrium distribution of hydrolysed dyestuff between textile fibers and an aqueous bath at constant temperature quantify unfixed chemical removal. A wash off isotherm plots the equilibrium concentration of residual dye retained on fabric against the concentration dispersed in the surrounding wash liquor. Data points define the clearing boundary where additional rinsing ceases to extract loose dye without changes in bath temperature or liquor ratio.
Thermodynamic boundaries restrict the scope to desorption and exclude dye fixation kinetics during dyeing.
Thermodynamic Behavior
Equilibrium partitioning follows Langmuir or Freundlich adsorption models inverted to represent desorption conditions. Along a wash off isotherm, initial rinse baths sit on the steep slope where high desorption rates remove bulk unfixed surface colour rapidly. As the bath accumulates desorbed dye, chemical potential gradients flatten, limiting further removal until fresh liquor enters the system.
Higher wash temperatures shift the isotherm downward, indicating lower equilibrium dye retention on the substrate. Added electrolytes shift the equilibrium in reverse, increasing dye affinity and causing redeposition onto white ground fabric.
Process Design
Continuous washing ranges rely on these curves to determine water flow rates and tank counts. Analyzing the wash off isotherm for a reactive dye recipe indicates whether four washing boxes will suffice or if six are required to prevent staining. Dyes with unfavorable isotherms require specialized polymeric washing agents that encapsulate desorbed color molecules to prevent redeposition.
Excessive water use occurs when mills add extra rinse boxes beyond the plateau where the curve levels out.
Laboratory Protocol
Generating empirical curves requires exposing standardized dyed fabric swatches to series of washing baths with graduated liquor ratios in sealed dyeing canisters. Spectrophotometric analysis of the wash liquor and residual fabric swatches establishes the data points needed to construct the wash off isotherm under isothermal conditions. Samples tumble in thermostatically controlled baths until equilibrium is established between bound and desorbed dye phases.
Calculations convert absorbance values into dye mass per unit fiber weight across multiple liquor dilutions. Plotting concentration ratios reveals the saturation threshold for specific dye-fiber pairings. Ignoring desorption equilibrium leads to dye bleed and wet crocking failures in post-production garment testing.