Chemical Alteration
Alkaline modification of cellulosic fibres changes the crystalline structure of cotton from cellulose I to cellulose II. This caustic soda treatment, applied during mercerisation, increases the amorphous regions of the fibre to allow greater dye uptake and tensile strength. The swollen fibres present a rounder cross-section that scatters less light, resulting in a more lustrous fabric appearance.
Process Execution
Application of highly concentrated sodium hydroxide requires controlled cooling systems to maintain the bath temperature between fifteen and twenty degrees Celsius. Impregnation occurs under high tension to prevent the cotton yarn or fabric from shrinking during the swelling phase. After a contact time of approximately fifty seconds, the textile is rinsed thoroughly to remove the alkali before tension is released.
Structural Output
Successful execution increases the dye affinity of the cotton yarn by fifty percent and enhances the yarn strength by twenty percent. Moisture regain rises as the accessible hydroxyl groups increase in number. Shrinkage resistance in subsequent wet processing is improved.
Industrial Limitation
Over-exposure or incorrect temperature control during the dwell phase causes irreversible damage to the cellulose chains, resulting in a harsh fabric hand and degraded tear strength. If the concentration falls below two hundred grams per litre, the desired conversion of the crystalline lattice remains incomplete. This treatment is restricted to cellulosic materials and is unsuitable for protein fibres like wool.