Surface Resistance
Molecular interaction between individual filaments governs the stability and drafting behavior of a roving or yarn. During the spinning process, inter fibre friction provides the necessary cohesion to prevent the strand from pulling apart before the twist is applied. This resistance depends on the surface morphology of the fiber and the presence of any spin finishes or lubricants.
Cohesive Force
Drafting rollers rely on a specific level of grip to pull the fibers past one another at controlled speeds. If inter fibre friction is too low, the roving will slip and create thin spots that reduce the quality of the final thread. Conversely, excessive resistance leads to fiber breakage and the accumulation of static electricity during the carding stage.
Processing Influence
Environmental conditions such as humidity and temperature alter the moisture regain of natural fibers and change their sliding characteristics. Cotton and wool require careful conditioning to ensure that the inter fibre friction remains constant throughout the mill. Synthetic fibers are often textured to increase their mechanical interlocking and improve the bulkiness of the knitted fabric.
Quality Variable
Laboratory testing of fiber beards provides a coefficient of friction that informs the adjustment of the spinning frames. When inter fibre friction is accurately controlled, the resulting yarn exhibits a high degree of uniformity and strength. Measurements are taken using a capstan method or a sliding plate tester to quantify the force required to initiate movement between the surfaces.
This data allows the chemist to formulate the correct amount of softener or size for the specific fiber blend being processed.