Spectrochemical Analysis
Infrared spectroscopy of textile materials identifies specific chemical bonds by their characteristic absorption of light energy. The o-h absorption band appears in the infrared spectrum when hydroxyl groups vibrate in response to electromagnetic radiation. This spectral feature is highly prominent in cellulosic fibers like cotton, viscose, and linen.
It provides a direct way to identify the presence of these fibers in unknown yarn samples.
Moisture Measurement
Cellulosic fibers naturally absorb water from the surrounding air, which shifts and intensifies the hydroxyl absorption signals. By measuring the area under the o-h absorption band, laboratory technicians can estimate the moisture content of the fabric without having to weigh it before and after oven drying. This spectroscopic method is rapid and does not damage the fabric sample.
It is particularly useful for in-line moisture monitoring during the textile finishing process.
Fiber Differentiation
Distinct polymer structures produce different absorption profiles depending on the concentration of hydroxyl groups along the polymer chains. For example, polyester has no hydroxyl groups and will not show any significant absorption in this spectral region, while cotton will show a broad and intense peak. This difference allows the spectrometer to quickly distinguish between pure cotton and cotton-polyester blends.
Using this method, quality inspectors can verify fabric compositions at the shipping dock in seconds. This non-destructive test reduces the need for wet chemical extraction methods, which are slower and use hazardous solvents.
Calibration Check
Atmospheric water vapor also absorbs infrared light in the same spectral region, which can interfere with the fiber measurement. To ensure accuracy, the spectrometer must be calibrated by running a background scan of the empty sample chamber before each test run. This calibration removes the ambient air signal from the final fiber spectrum.