Speed Differential
Fabric finishing ranges utilize stenter frames to dry, heat-set, and adjust the width and density of woven and knitted textiles under controlled thermal conditions. The operational control stenter overfeed percentage defines the ratio by which fabric speed entering the stenter frame exceeds the linear speed of the pin or clip transport chains. Feeding fabric faster than the holding chain allows the textile material to accumulate micro-slack along the longitudinal axis before pinning.
This intentional overfeed permits warp yarns to shrink and relax in the heating chamber.
Crimp Recovery
Longitudinal relaxation inside the heat chamber restores natural yarn crimp disrupted during weaving or knitting operations. When overfeed is applied, warp threads contract naturally under hot air circulation, increasing yarn crimp amplitude and fabric density per unit area. Insufficient overfeed holds the fabric under tension, locking longitudinal strain into synthetic fibers and resulting in high residual garment shrinkage during laundering.
Correct overfeed setting yields stable fabric GSM and soft hand feel.
Dimensional Stability
Improper adjustment of entry speed ratios leads to fabric weight and width compliance failures. Setting stenter overfeed percentage too high causes fabric wave formation, pinning drops, and uneven selvedge tracking along the pin chain. Conversely, inadequate overfeed produces fabrics with low longitudinal residual shrinkage protection, leading to severe length loss when garments are washed by end users.
Finishing plant quality control verifies residual stability through standard wash tests.
Chain Synchronization
Digital drive systems synchronize entry roller speed with transport chain velocity across variable production speeds. Operatives adjust overfeed parameters based on fabric weight, fiber content, and target residual shrinkage specifications. Precise speed control ensures consistent fabric density end to end.