Transverse Capacity
Transverse capacity values define the maximum force a fabric can endure in the horizontal direction before the yarns snap. The weft breaking load measures the strength of the filling yarns that run across the width of the material from selvage to selvage. This measurement is essential for assessing the durability of fabrics used in seating or technical upholstery where lateral stress is common.
Loading Mechanism
Testing procedures utilize a constant rate of extension machine to apply force to the fabric width. During the evaluation of the weft breaking load, the equipment stretches the material until the horizontal yarns fail. The result depends on the yarn type, the yarn count, the number of picks per inch and the interlacing pattern of the weave.
Comparison Variable
Careful analysis of the failure point during a weft breaking load test identifies potential flaws such as uneven yarn tension or damaged fibres. If the fabric breaks at a lower load than specified, it may indicate that the loom settings were incorrect or the yarn quality was substandard. This data allows the mill to correct issues before the fabric reaches the garment factory.
Output Quality
Garment manufacturers use the weft breaking load to determine if a fabric can withstand the stresses of high speed sewing and everyday wear. Fabrics with low lateral strength are often restricted to lightweight or decorative applications.