Indenter Geometry
Precision instruments provide a standardized numerical value for the hardness of solid materials through a controlled indentation test. A shore d durometer features a sharp, conical point designed to penetrate hard surfaces like nylon and polyurethane. This tool provides the necessary data for verifying the mechanical properties of textile machinery components and heavy-duty synthetic reinforcements.
Measurement Scale
A probe consists of a hardened steel rod with a 30 degree angle point and a precise radius at the tip. Unlike softer scales, the shore d durometer uses a high spring force of 44.45 Newtons to drive the point into the sample. The depth of penetration is inversely proportional to the hardness reading on the dial.
Material Application
Results are expressed on a scale from 0 to 100, where higher numbers represent greater resistance to deformation. Most structural plastics used in garment hardware or specialized industrial fabrics fall between 40 and 90 on this scale. If a material is too soft for the shore d durometer, the needle may bury itself completely, indicating that a Shore A scale is more appropriate.
Testing Procedure
Constant pressure must be applied to the instrument for a specific duration to ensure the reading is stable. Variations in the thickness of the sample can influence the result if the material is thinner than 6 millimeters.