Knitting Distortion
Weft-knitted fabrics frequently exhibit a structural twist after washing due to the release of residual stresses in the loop structure. The dimensional distortion known as single jersey spirality causes garment seams to twist and skew during laundering. Loop distortion is driven by the torque in highly twisted single yarns and the unbalanced structure of the single jersey knit which has no opposing loops to offset the twist.
Technical auditors measure the angle of the wale lines against the perpendicular edge to quantify the severity of the twist on a flat surface.
Yarn Contribution
Highly twisted single yarns store torsional energy that naturally uncoils when the fabric is wet out and relaxed. Using plied yarns or alternating courses of Z-twist and S-twist yarns cancels the torsional forces and eliminates the skew. Ring-spun yarns generally produce more distortion than rotor-spun yarns due to differences in yarn structure and fiber orientation.
Finishing Remedy
Mechanical skewing of the fabric during stenter processing can temporarily compensate for the angle of spirality. Resin finishing or heat-setting stabilizes the yarn positions to prevent the fabric from twisting during subsequent washing cycles. Compacting machines compress the loops to reduce the free space available for fiber movement.
Garment Evaluation
Apparel manufacturers specify maximum spirality limits of five percent to prevent twisted side seams in t-shirts. Pattern cutting must align with the wale direction to ensure that the finished garment hangs correctly on the body. Repeated washing trials are conducted to verify that the skew remains within acceptable limits over the product lifetime.