Yarn Waviness
Percentage increase in length of a filling yarn when it is removed from a fabric and straightened measures the degree of waviness caused by weaving. This structural property, known as pick crimp, determines the elasticity, bulk, strength, and recovery of the woven fabric in the filling direction. The interlacing of the filling yarn with the warp yarn creates a series of waves, or crimp, that must be balanced to achieve the desired fabric hand and physical dimensions.
Weaving Control
Loom adjustments such as warp tension and beat-up force directly influence this crimp level during fabric construction. If the warp tension is set too high, the pick crimp increases because the warp yarns remain straight, forcing the filling yarns to bend further around them. This shift can alter the finished width of the fabric, leading to excessive shrinkage during the subsequent dyeing and finishing stages.
Testing Standard
Standardized testing methods like ASTM D3883 outline the procedure for measuring this parameter using a crimp tester. A sample of yarn of known woven length is removed from the fabric, tensioned until it is straight without stretching, and then measured again. The ratio of the difference to the woven length yields the crimp percentage.
This measurement is critical for estimating yarn consumption during loom set-up and ensuring consistency across different production runs.
Commercial Consequence
Incorrect crimp levels can lead to structural defects like bowing, skewing, or fabric instability in garment sewing. Verifying this value at the finish inspection stage protects garment makers from sizing discrepancies in their cutting rooms.