Standard Method
An international testing standard describes the method for determining the permeability of fabrics to air under a specified pressure drop. The protocol known as iso 9237 is applied widely to performance apparel and industrial textiles. It provides a consistent framework for comparing the air transmission rates of different materials, ensuring that test results from different laboratories are directly comparable.
This standard does not apply to highly dense materials such as plastic films or impermeable rubbers.
Apparatus Spec
The test procedure requires clamping a specimen of the fabric across a circular test area of twenty square centimeters. A vacuum pump draws air through the sample, and the flow rate is adjusted to achieve a pressure differential of one hundred pascals. The volume of air passing through is recorded.
Testing Process
Quality control laboratories use these measurements to verify that activewear and outerwear fabrics meet specified breathable performance standards. If the fabric has been coated or laminated, the test verifies the consistency of the treatment. The method is used for woven and nonwoven fabrics.
Verification Range
Accurate results depend on preconditioning the samples in a standard atmosphere to eliminate moisture variations. Wet or humid fabrics can show reduced permeability because water fills the pores. The standard provides a reliable metric for international commercial trade of functional textiles.